Please scroll right down to locate your bug zapper by brand name and ZapZone Defender mannequin type and follow our instructions on how one can change your bug zapper globe. At no time are you ever to remove the hood or cage of the bug zapper to change the globe. It will then enable entry to reside parts and void guarantee. Which is your Bug Zapper? Click the hyperlinks below to find the instructions for that particular bug zapper. 1. Unplug your Bug Vac and take away from its mounting place. 2. Resting your Bug Vac on a gradual floor take away the water draw from the lure. 3. Remove the lens by locating the gap at the base of the lens in the centre, use your fore finger and thumb to squeeze the empty drawer holder together and punctiliously slide a skinny steel object. 4. Gently angle the item behind the lens to lift the centre and release the left tab by sliding the lens to the correct.

Repeat by sliding the lens to the left to launch the proper tab. 5. Twist the globe to open the lamp holder to remove the lamp. 7. Twist the brand Zap Zone Defender new globe into place to shut the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding hole and Zap Zone Defender repeat with the right tab. 9. Secure the lens by pushing it downwards, you will really feel it click on into place. 10. Replace the drawer filled with water and a number of other drops of detergent. 11. Plug your bug zapper into the power socket and the globe should light up. Following steps 1-5 test the globe is safe in the lamp holder and chemical-free bug control change plastic cover. Use genuine yard guard substitute lamps in your bug zapper. When you have adopted these steps and your zapper still won’t light up, Zap Zone Defender please contact us. 2. Holding your bug zapper, flip it the wrong way up so the hood is facing away from you.

3. Access the light by locating the lever within the centre of the bug zapper and pull with your finger in direction of you. 4. The bulb cowl will open and you will have the ability to entry the substitute globe. 5. Gently pull at the globe to remove it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and secure by again pulling the lever in the direction of you and then releasing once the cover has closed securely. 9. Plug your bug zapper into the facility socket and the globe should mild up. Following steps 1-four test the globe is secure in the lamp holder and Zap Zone Defender change plastic cover. When you have adopted these steps and your zapper still won’t light up, please contact us. 2. Holding your bug zapper, flip it the wrong way up so the hood is going through away from you. 3. Access the sunshine by locating the lever within the centre of the bug zapper and pull along with your finger towards you.

4. The bulb cover will open and Zap Zone Defender Setup you will be able to access the replacement globe. 5. Gently pull on the globe to take away it from the lamp holder. 8. Replace plastic cowl on the underside of the bug zapper and safe by once more pulling the lever in the direction of you and then releasing once the cover has closed securely. 9. Plug your bug zapper into the ability socket and Zap Zone Defender the globe should mild up. Following steps 1-4 check the globe is secure in the lamp holder and exchange plastic cover. When you have adopted these steps and your zapper nonetheless won’t mild up, please contact us. 2. Holding your bug zapper, Zap Zone Defender flip it upside down so the hood is going through away from you. 3. Using a phillips head screwdriver remove the 2-3 screws situated on the underside of the bug zapper. 4. Remove the plastic cowl sealing the bug zapper globe in place.